Home/
Switches & Routers/
Switch & Router Modules/
Ethernet Transceivers/
Universal SFP 10G SX

Universal SFP 10G SX

Details:
FTLX8574D3BCL 10Gb/s SFP+ optical transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3-2012 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8574D3BCL is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is RoHS compliant as described in Application Note AN-2038.
  • Hot-pluggable SFP+ footprint
  • Supports 9.95 to 10.5 Gb/s bit rates (contact Finisar for higher data rate support)
  • Power dissipation < 1W
  • RoHS compliant
  • Single 3.3V power supply
  • Maximum link length of 400m on OM4 MMF
  • Uncooled 850nm VCSEL laser
  • Receiver limiting electrical interface
  • Duplex LC connector
  • Built-in digital diagnostic functions
  • Commercial temperature range: -5°C to 70°C

Details:FTLX8574D3BCL 10Gb/s SFP+ optical transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3-2012 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8574D3BCL is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is RoHS compliant as described in Application Note AN-2038.

  • Hot-pluggable SFP+ footprint
  • Supports 9.95 to 10.5 Gb/s bit rates (contact Finisar for higher data rate support)
  • Power dissipation < 1W
  • RoHS compliant
  • Single 3.3V power supply
  • Maximum link length of 400m on OM4 MMF
  • Uncooled 850nm VCSEL laser
  • Receiver limiting electrical interface
  • Duplex LC connector
  • Built-in digital diagnostic functions
  • Commercial temperature range: -5°C to 70°C

12.00
₱
Vendor code:

huawei-sfp-10g-sx

Availability:

Backorderable

Tested & Approved
Share to:
Product Code Universal SFP 10G SX
Distance 400 m
Data Rate (max) 10.5 Gb/s
Protocol 10x Fibre Channel Compliant 10 Gigabit Ethernet Compliant Wireless CPRI Compliant
Low End Case Temperature (°C) -5
High End Case Temperature (°C) 70
Diagnostics Digital
Transmitter VCSEL
Receiver PIN
Voltage Supply 3.3
Connector LC
Wavelength 850nm Band

Similar products

Stock

Universal QSFP28 100G ZR4

The Huawei 02312NCX QSFP28-100G-1310nm-80km-SM-01 compatible optical transceiver module is designed with duplex LC connectors, reaching a link up to 80km over single-mode fiber(OS2). QSFPTEK manufactured 100GBASE-ZR4 QSFP28 transceiver module is compliant with QSFP28 MSA Compliant standard. Besides, DDM (digital diagnostics monitoring) function is supported on the 100G fiber optic transceiver to achieve real-time operating parameters monitoring. With these features, this 100G QSFP28 transceiver is widely applied in 100G telecom connections, DCI, metro network, long-haul, and high-performance computing networks application.
[[ getCurrentDecimal("3250.00") ]]
Pre-order

Universal SFP 10G LX

Original Huawei SFP 10G LX
25.00
₱
huawei-sfp-10g-lx
[[ getCurrentDecimal("25.00") ]]
Add to cart